> ## Documentation Index
> Fetch the complete documentation index at: https://docs.neuralfactory.ai/llms.txt
> Use this file to discover all available pages before exploring further.

# Get a report on a schedule

> Have an agent write the same report for you every Monday morning, check a run, and pause the schedule.

A schedule asks an agent, an AI helper, to do the same task for you at set times. Here you set up a "Weekly industry news" schedule: every Monday at 08:00 the agent searches the web and writes you a short summary, which waits for you in **Tasks**.

> [!NOTE]
>
> **Time:** about 10 minutes · **Role:** Member or Admin (Viewers have no **Schedule** button) · **Works on:** Enterprise and SaaS. On the SaaS Free plan you can have 1 schedule. · **You need:** a published agent you can use, with **Web search** switched on under **What it can do** (see [Build your first agent](https://docs.neuralfactory.ai/user-guide/guides/first-agent.md) to make one)

<video controls preload="metadata" poster="/videos/scheduled-report.jpg" src="https://mintcdn.com/neuralfactory/y-MI7aIFykaw0cY2/videos/scheduled-report.mp4?fit=max&auto=format&n=y-MI7aIFykaw0cY2&q=85&s=8b56d18e2cc53980c6e22969111500ed" />

Watch: Get a report on a schedule (57 s)

## What you will have at the end

* A schedule named "Weekly industry news" that runs every Monday at 08:00.
* One report it wrote, opened from the schedule's run history.
* The schedule paused, ready to resume when you want the reports again.

## 1. Write the request and schedule it

Write the request the way you would for a single task. Every run asks it again.

**1. Open New task and pick the agent**

Click **New task** in the sidebar. Click the agent name in the composer's bar and pick the agent.

**2. Write the request**

Type what each report should contain, without sending it. For example: "Search the web for this week's news about the European logistics market. Write five bullet points, each with a link to its source."

**3. Click Schedule**

Click **Schedule** in the composer's bar instead of sending. The **Schedule this task** sheet opens with your request under **What should it do?**

**4. Name it**

Change **Name** to "Weekly industry news". This is the name you will see in **Tasks**.

**5. Choose Monday at 08:00**

Under **Runs**, keep **Every day**. The picker starts on weekdays at 09:00, so under **On these days** switch off every day except Monday, and set **At** to 08:00. The sentence below the picker says in words when it runs.

**6. Check the time zone and create**

**Times in** shows the time zone the schedule follows, your browser's unless you click **Change**. **Next 5 runs** lists the coming Mondays. Click **Create schedule**.

![The schedule sheet for the Market news scout agent, named Weekly industry news, with the request, Every day with only Monday picked, 08:00, the sentence Every Monday at 08:00, the next five Mondays and the Create schedule button.](https://mintcdn.com/neuralfactory/y-MI7aIFykaw0cY2/images/app/scheduled-report-sheet.png?fit=max\&auto=format\&n=y-MI7aIFykaw0cY2\&q=85\&s=692f55c208a693e636894ca0e237752e)

> [!TIP]
>
> The schedule's page opens, and a message names the next run.

## 2. Find it under Tasks › Scheduled

**1. Open Tasks**

Click **Tasks** in the sidebar, then **Scheduled** above the list.

**2. Find your schedule**

"Weekly industry news" is in the list with the status **Scheduled**. The **When** column shows when it runs next.

**3. Open it**

Click the row. The schedule's page shows the **Worker**, the **Status**, the **Cadence** in words and the **Next run**, with **What it asks** below.

> [!TIP]
>
> The page reads **No runs yet. Use "Run now" to try it.** under **Run history**.

## 3. Try a run now

You do not have to wait until Monday to see what the report looks like.

**1. Click Run now**

Click **Run now** in the top bar. One run starts and its task opens, so you can watch the agent work.

**2. Read the report**

When the agent has finished, read the answer. If it is not what you wanted, change the request with **Edit** on the schedule's page.

**3. Look at the run history**

Go back to the schedule's page. **Run history** has a row for the run, with **Manual** as its **Trigger**, its **Outcome**, **Duration** and **Cost**. **Open task** opens the report again.

Each run starts a fresh task and never carries the last run's conversation, so every report starts from your request alone.

> [!TIP]
>
> The run's row in **Run history** shows **Completed** under **Outcome**.

## 4. Pause it

**1. Click Pause**

On the schedule's page, click **Pause**. The status changes to **Paused** and no more runs start.

**2. Resume when you need it again**

Click **Resume**. The next run follows the cadence from then on.

**Run now** works while the schedule is paused. To stop for good, click **Delete**: the tasks it already started are kept.

> [!TIP]
>
> Under **Tasks** › **Scheduled**, the row shows **Paused**.

## Rules worth knowing

The sheet sums these up in one line: "Runs count against your usual limits. If one is still going when the next is due, the next is skipped. Three failures in a row and the schedule pauses itself."

* A schedule runs as you, with your access. Each run counts toward your usage and your number of tasks at a time.
* A run is also skipped while the agent is not published.
* Runs that failed, timed out or were not started all count toward those three failures.
* How many schedules you may have:
  * **SaaS**: 1 on Free, 10 on Pro, 10 per person and 50 per organization on Business.
  * **Enterprise**: by default 20 agent schedules per person and 200 per organization.

## If something goes wrong

* **"Write what the agent should do first."**: the message box was empty when you clicked **Schedule**. Type the request, then click **Schedule** again.
* **"Your plan allows 1 schedule per person. Upgrade your plan or delete a schedule to add another."** (SaaS): delete a schedule you no longer use under **Tasks** › **Scheduled**, or upgrade. See [Plans and limits](https://docs.neuralfactory.ai/user-guide/admin/billing.md).
* **The page says Stopped running**: the schedule paused itself, and the page gives the reason, for example three failed runs or an agent you can no longer use. Fix the cause, then click **Resume**.
* **A run shows Skipped**: the previous run was still going, or the agent is not published. See [Schedules](https://docs.neuralfactory.ai/user-guide/tasks/schedules.md) for every outcome.

## Where to go next

* [Schedules](https://docs.neuralfactory.ai/user-guide/tasks/schedules.md)
* [Tasks](https://docs.neuralfactory.ai/user-guide/tasks/overview.md)
* [Connect an agent to your tools](https://docs.neuralfactory.ai/user-guide/guides/connect-your-tools.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.